How to Reconnect Netgear Extender to Home WiFi Network

WiFi Issues While Working From Home

This write-up will walk you through a step-by-step guide on how to reconnect your Netgear WiFi range extender to home WiFi network. Scroll down to read more.

Netgear extender – a great device to help you amplify the existing WiFi range and coverage, thus providing you the whole-home WiFi range in your house or workplace. At times, it gets disconnected from your home WiFi network, leaving you with your home router’s range only. In such a scenario, you get bound to use your WiFi-compatible devices nearby your router only. So, the ultimate way to fix this issue is to reconnect your Netgear WiFi range extender to the home WiFi network.

Without further ado, let’s learn how to get the job done.

Reconnect Netgear WiFi Extender to Home WiFi Network

Essential Tip: Make sure that you have properly performed the Netgear extender setup in your home.

A Netgear WiFi extender can be reconnected to your home wireless network in two ways: using WiFi or via an Ethernet cable. Read on.

  1. Using WiFi 

Prior to reconnecting your Netgear WiFi extender to home network, make sure that it is connected to the router properly and getting a valid IP address. Once done, consider the below-highlighted instructions to reconnect your Netgear extender using WiFi:

  • Connect the power adapter of your Netgear extender to a wall socket.
  • Now, press and hold the Factory Reset button on it.
  • Once the extender resets, power on your computer or another WiFi-compatible device.
  • Launch your favorite web browser on it.
  • After typing in the address bar, press the Enter key.
  • You will see that the Netgear WiFi range extender login window has appeared.
  • Here, you will be required to enter the admin username and password. Keep in mind that the login credentials are case sensitive, so enter them carefully. Otherwise, you may get issues.
  • Fill in the asked details and hit Log In.
  • As soon as you are done with login, walk through the on-screen steps to reconnect your Netgear WiFi range extender to the home WiFi network.
  • In the event that your home WiFi router utilizes the WEP security, type its SSID and password when prompted.

Now, reconnect all your WiFi devices to the Netgear extender’s network, i.e. Netgear_ext.

  1. Using an Ethernet Connection 

Do you want to reconnect your Netgear extender using an Ethernet cable? If you nod in yes, here are the do-follow steps:

  • Plug your Netgear wireless range extender into an electrical outlet and power it on.
  • Grab an Ethernet cable and insert its one end to the extender whereas another to the home router. Be sure that the Ethernet cable you use is not worn out or damaged.
  • Make sure that your home WiFi router is also turned on properly.
  • Switch on your laptop or PC whichever you often use.
  • Visit mywifiext login admin portal.
  • In case you are unable to access, clear up all cookies, caches, as well as browsing history from the web browser you use and try again.
  • As soon as you reach the Netgear WiFi range extender login page, enter the user ID and passphrase into the given fields.
  • Hit Log In.
  • Now, head over to the Wireless Settings section.
  • Under the Security Options, verify if the value in the Password field is correct.
  • If the value is incorrect, change your Netgear WiFi range extender’s password to something more secure.
  • Finally, hit the Apply button to save all setting changes made by you.

Now, you are free to reconnect all your client devices to the Netgear WiFi range extender and enjoy a hassle-free internet connection all over the home or workplace. In case of any difficulty or doubts, reach out to our team of proficient experts via comments.


A Must-Read Guide to fix Not Working Issue

Previous article

Common Reasons Behind Motorcycle Accidents

Next article

You may also like


Leave a reply

Your email address will not be published. Required fields are marked *

More in Tech